Get high performance and great precision.
The Graphtec FC2250 Series cutting plotter has 4 models available which differ in sizes and hold down methods so it can meet your exact needs.
This advanced large format flatbed cutting plotter has a wide tooling lineup allowing you to cut a wide range of materials including PET film for electronic design, chipboard, magnetic sheet or roll, matte board, gasket, marking film, sandblast rubber, high-intensity reflective film, rubber sheet, cardboard, Microflute board, apparel paper, paper for inkjet printer and more with a maximum cutting force of 9.8N (1kgf).
Make your customer’s dreams come true with the versatile FC2250. The job is made easy with 2 available types of media hold-down methods. Vacuum suction type holds the entire surface of the media to the cutting board using an external vacuum pump. Magnetic type holds the media using a magnetic cutting board and sheet holder plate.
Dual head design features 500 grams and 1000 grams maximum down force for more efficient marking and cutting, and the built-in ARMS system simplifies contour cutting of printed materials. Achieve higher productivity with our special blade and blade holder for thicker materials and our simple creasing function that creates fold lines for clean folding on micro-flute and cardboard. Enables higher productivity of POP, stickers, and prototype cartons.
Enhanced functions include reverse-side cutting/creasing. Cutting and creasing can be carried out from reverse-side when using the registration marks. This function prevents the crease line from appearing on the printed surface. Equipped with two tool holders for easy selection. Two tools can be mounted at the same time for easy switching. If the cutter blade and the creasing tool are mounted at the same time, cutting and scoring operations are performed automatically. Multi-pass cut function enables you to perform a cut on media that cannot be cut with a single cutting operation. Graphtec’s proprietary tangential emulation ensures sharp edges and corners.
FC2250 comes with the following software: Graphtec Studio easy-to-use design application software for creating original designs. Cutting Master 3 plug-in sends the cutting object to the plotter and can be used to control the plotter. D-CUT Master software reads a file in the AutoCAD R13 format and then enables data display, deleting, sorting, changing of the output order, specification of output setting, and creation of plot data and output to a plotter.
Wide format finishing JUST GOT A WHOLE LOT EASIER. The Colex Sharpcut SX Series digital flatbed cutting system is a powerful and versatile cutting device. This one machine bridges the gap between the need for both a routing table and a flatbed knife cutter. For...
HIGH-PERFORMANCE CUTTING PLOTTER: The FC9000 Series is Graphtec’s most advanced, versatile roll fed cutting plotter to date. Advanced Registration Mark Sensing 8.0 features the introduction of Graphtec’s Datalink barcode generation system which efficiently loads
With its wide variety of cutting applications, the CE7000 Series remains a leader in cost and performance, incorporating a Datalink Barcode System, a secondary USB port, and a carrier sheet table allowing cardstock and ridged materials to be contour cut for POP applications.
The heavy-duty SteelTraK is the longest, most accurate and easy-to-use manual vertical cutter available. . Developed specifically for the tougher and thicker rigid and semi-rigid substrates used in today’s sign-making market, SteelTraK handles over-sized materials...
Increase your production with the ultimate cutter engineered to perform. The Javelin Series 2 Cutter Bar is a precision cutter available in 5 lengths to meet your exact needs, 44″, 64″, 84″, 104″ or 124″. You will be amazed by its accuracy. This cutter is ideal for...